For high-gloss, clear, decorative coating for wood countertops and other similar applications.
System Three MirrorCoat is a two-part, epoxy-resin system specially designed to create a high-gloss, clear, decorative coating for wood and other materials. Resin systems like this are sometimes referred to as "bartop coatings." But unlike most bartop coatings, MirrorCoat is mixed in the ratio of two parts of resin to one part of hardener by volume. This 2:1 ratio makes for a harder and more heat-resistant coating than typical 1:1 coatings.
Surface must be sanded and clean, dry and free of oil-based paint, oil, wax, dust and other contaminants. Do not wipe with tack cloth.
Ratio by volume is 2 parts resin A to 1 part hardener B. Ratio by weight is 100 parts resin A to 44 parts hardener B. Do not alter mixing ratio. Mix the resin and hardener together for at least 3 minutes. Large batches need longer mixing for uniform cure.
Best results will be obtained @ 75º F. To avoid waste, mix only the quantity that can be used in 60 minutes. Pour onto the surface to be coated, a brush may be used to evenly spread MirrorCoat over the flat surface.
Full cure in 24 hours
Caution! Vapors harmful. Keep out of reach of children.
*Prices subject to change without notice.
|RES3-MC01||1.5 Pint MirrorCoat Kit||1.5 Pint||SHOP|
|RES3-MC02||1.5 Quart MirrorCoat Kit||1.5 QT||SHOP|
|RES3-MC03||3 Quart MirrorCoat Kit||3 Quart||SHOP|
|RES3-MC15||1.5 Gallon MirrorCoat Kit||1.5 Gal||SHOP|
|RES3-MC30||3 Gallon MirrorCoat Kit||3 Gal||SHOP|
Refer to MSDS (27 KB) for further information.
Phone: (800) 566-2653
Fax: (808) 841-2108