Great all-purpose, industrial-quality laminating resin.
Medium viscosity for quick saturation.
A wax-free, general-purpose laminating resin. Specially formulated for bonding single or multiple layers of fiberglass cloth, mat, or woven roving to most woods, foams, fiberglass, and metal surfaces. Do not use on polystyrene. Do not use in direct sunlight. Working time of mixed resin is approximately 15 minutes.
Fiberglass Hawaii MEKP catalyst must be used as a hardening agent. All Fiberglass Hawaii polyester resins are two part systems except for our UV Cure Surfboard Resins.
To avoid waste, mix only the volume of resin that can be applied in 10-15 minutes. Using a brush or squeegee, apply resin to surface. After fabric is thoroughly saturated use resin roller or squeegee to remove wrinkles, air bubbles, and any excess resin. This material will remain tacky and is not formulated to be sanded. To sand surface, you must apply Fiberglass Hawaii Surfacing Resin.
Hulls, decks, cabins, bulkheads, stringers, and fiberglass coolers
Body, hoods, fenders, RV’s and campers
Fiberglass tubs/showers, decks, and gutters
Keep out of reach of children
Material Data Safety Sheets (MSDS)
To request product MSDS please email: Product Support
*Prices subject to change without notice.
|RPOO-ML05||Marine Laminating||5 Gal||SHOP|
Phone: (800) 566-2653
Fax: (808) 841-2108