Notes
Notes
The prefect resin for embedding and making solid plastic objects. Allows multiple pours.
A wax-free, water-clear, casting resin. Designed for casting, coating, or embedding objects. Ideal for use with ceramic, polyethylene, and glass molds. Do not use on polystyrene or styrene plastics. Do not use in direct sunlight. Working time is 18-20 minutes.
Preparation
Mold surface must be clean, dry, and free from dirt, dust, and other contaminants. Apply mold release to surface of mold.
Mixing
Fiberglass Hawaii MEKP catalyst must be used as a hardening agent. All Fiberglass Hawaii polyester resins are two part systems except for our UVCure Surfboard Resins.
Application
To avoid waste, mix only the amount of resin that can be poured or applied in 18-20 minutes. Pour slowly.
Uses
Embedding, coating, and casting various specimens and objects, such as shells, sea horses, abalone shell, leaves, coins, figurines, photographs, and other dry objects. Create unique paperweights, penholder bases, and other art castings with various layers, or by using resin pigments or tints. Can be used with ceramic, polyethylene, urethane, or glass molds.
The following table is a suggested guide for PACKAGED resin-to-catalyst by volume.
PLEASE REFER TO THE PRODUCT LABEL FOR SPECIFIC MEASUREMENTS BY VOLUME AND TEMPERATURE.
RESIN PACKAGED SIZE | CATALYST PACKAGED SIZE |
PINT | 1/2oz |
QUART | 1oz |
GALLON | 2oz or 4oz (2oz-3oz by volume) |
5 GALLON | 14oz (10oz-15oz by volume) |